Blog

 The glass has excellent properties and can be used in many occasions. In terms of interior decoration, painted glass and hot-melt glass can be used, with various styles; in the occasion where personal safety needs to be protected, it is suitable to use tempered glass, laminated glass and other safety glass; when it is necessary to adjust brightness and protect privacy, frosted glass and dimming glass may be used, which is convenient and durable. Want to understand the glass mosaic construction technology related information, understand the crystal glass mirror mosaic construction should pay attention to what, please see below.

1. Make sure that the construction surface is flat and clean. After the datum line is laid, the cement or adhesive is applied to the construction surface evenly.

2. Paste the mosaic in order, leaving appropriate space between each piece. After pasting one piece, the mosaic is flattened with wood strips, Make sure that each part is compacted and fully combined with the adhesive.

3. Tear the paper every other day or after the adhesive is dry. Wet the sticker with sponge and soak it in water. After the sticker is completely wet, the paper can be torn, Then the paper can be torn.

4. Caulking. Fully fill the gap with sealant or original primer adhesive and white cement with tools.

5. Clean. Clean the excess sealant attached Contact Us to the mosaic with a wet sponge, and then wipe it with a dry cloth, The construction steps are completed.

note: for mosaics connected with plastic mesh, the plastic mesh is laid on the construction surface coated with cement during construction, so step 3 can be omitted.

1. Preparation tools: ceramic tile glue, neutral adhesive (using two in one ceramic tile sealant), gear scraper, caulking tool, basin, clean water, cleaning cloth. (note that the mosaic can not be soaked in water before laying)

2. Inspection materials: pay attention to the product packaging, model, area, color and other data. First, measure the amount of mosaic, and then according to the construction situation, Mixing tile glue: first calculate the area of the building, and then calculate the amount of neutral swimming pool tile for sale tile glue you use. The covering area varies according to the specific situation of the project. (the smoother the base surface, the less slurry is used)

3. 3. Laying foundation: it is very important for the foundation of the wall, Use toothed scraper to swing the neutral paste and white cement on the wall until it is flat. Lay the base and ensure that it is moderate between 5 ℃ and 39 ℃. The wall surface after leveling must be smooth and consistent in color.

4. 4. Paving: if the mosaic is covered with net, it can be directly applied to the wall or ground with neutral adhesive, The mosaic should be paved neatly. (note that the gap between each piece must be consistent)

5. 5. Make sure the spacing is consistent: the gap between the mosaic and the mosaic must be consistent. This is a process that requires patience in the wood mosaic manufacturer process of paving mosaic, but it is an important link in the paving work. Poor paving may affect the wholeEffect.

6. 6. Reinforcement: after each mosaic is pasted, it is necessary to use a caulking tool to press firmly to ensure that each part is evenly compacted and fully bonded with the adhesive. Each mosaic must wait for its surface to dry and firm before proceeding to the next step.

7. 7. Mixing joint sealant: calculate the required building area first, The amount of sealant is calculated. Slowly pour the sealant into the water and stir it carefully until there is no sand.

8. 8. Caulking: batch the sealant on the mosaic with a caulking tool, and apply it evenly on the surface of the mosaic. The caulking tool should move diagonally from bottom to top, and then from top to bottom to ensure that all the sealant can be completely  wood mosaic for sale filled and there is no surplus residue, The mosaic gap must be fully filled, otherwise it is easy to accumulate dust, which will lead to the difficulty of cleaning in the future. (it is suggested that the setting strength of the joint is 28 days, so please avoid using easy dirt during this period)

9. 9. Cleaning: prepare a bucket of clean water when cleaning the mosaic surface as time is calculated according to the temperature of the day), Wipe off the excess sealant on the mosaic surface with a towel or a soft object, and then wipe the surface again with a towel until it is clean.

10. 10. Daily cleaning: you can use water to wipe the mosaic as daily cleaning. If you encounter stubborn stains under certain circumstances, you can use stone cleaner, However, please note that a large amount of water must be used for cleaning after cleaning.

Related concepts:

glassGlass is a kind of amorphous inorganic nonmetal material. It is usually made of a variety of inorganic minerals (such as quartz sand, borax, boric acid, barite, barium carbonate, limestone, feldspar, soda ash, etc.) as the main raw materials, and adding a small amount of auxiliary raw materials. Its main components are silica and other oxides. The chemical composition of ordinary glass is Na2SiO3, CaSiO3, SiO2 or Na2O · Cao · 6sio2. The main component is silicate compound salt, which is an amorphous solid with irregular structure. It is widely used in buildings to separate wind and light, belonging to mixture. There are also colored glass mixed with some metal oxides or salts, and toughened glass made by physical or chemical methods. Sometimes some transparent plastics (such as polymethylmethacrylate) are also called agricultural production system glass.