Sliding Drawer Box friendly reminder: drawers with this track should be made according to the specifications of the track. If the drawers have been finished, please purchase them carefully, so as not to use them Delay in construction period
loss of freight
installation video of hidden bottom rail
for reference only, copy the website and re open:
drawer making guidance: the thickness of the ordinary household board is 18mm, if the drawer is made according to the instructions, the side plate can not be stuck into the track slot. In this case, we suggest that the bottom of the drawer should be made with one side plate Then stick two sides on the bottom of the drawer and nail a 16mm wide wooden strip with a * on it. The thickness of the wooden strip is 5-8mm, so that the 16mm wide wood strip is stuck in the track slot. In this Fitting Cabinet Hinges way, the problem of side plate thickness can be solved
after the rebound accessories are combined with the track Closed state diagram [below]
the closing state diagram [figure below]
the rebound accessories are sealed packaging There are independent labels [below]
* * rebound accessories [below]
the two colors in the figure are the same due to the light
after the rebound accessories are installed on the track Pop up drawing [below]
* the steel seal of the rebound accessories is clear [below]
please refer to the instruction manual for detailed installation instructions Kitchen Square Tandem System I wish you a happy shopping
Comments