1. According to the size of the wooden door lock, select the appropriate cutter, fasten it in the horizontal milling vertical drill, vertical milling and drilling clamp of the keyhole machine, adjust the guiding rule, and press the cylinder pressing button.
2. When China sliding door lock manufacturers the vertical drill motor is started, the lifting cylinder also works at any time to push the vertical drill, and the motor descends to complete the drilling process. The depth is controlled by the travel switch, and it will automatically rise and reset when touching the travel switch. Press the motor start button to start the horizontal milling motor. At this time, the main motor drives the spindle milling cutter to rotate through the nylon belt. When the main motor is started, the swing motor is started at the same time under the action of frequency converter. The eccentric wheel connecting rod drives the main shaft milling cutter of the main bearing sleeve to do reciprocating motion. Press the table advance button, the working table is pushed forward slowly under the action of the air cylinder, and the milling groove depth is controlled by the travel switch. When the required size is reached, it will return automatically.
3. Press the profiling end milling button, Sliding door track pulley supplier the milling cutter of the drilling and milling motor descends. Under the action of the template, the shape of the plane door lock of the wooden door will be milled out. When the depth is reached, the vertical milling will be raised quickly by touching the lifting cylinder of the travel switch.
previous article: unique features of Jianlong wood door keyhole machine
Comments